 Phillips
Insert Bits
Special
ribbed bit design absorbs torque peaks reducing slippage and
breakage.
Reduced
diameter tip and ribs reduce cam-out and drywall damage.
Cold
formed for optimum toughness and resistance to wear.
Most
widely used style.
Many
configurations and hardnesses.
|
 Slotted
Insert Bits
Cold
formed for optimum toughness and resistance to wear.
Common in
telephone and other electrical devices.
Proper sizing is
important for efficiency.
Many configurations and hardnesses.
|
 Socket
Head / Allen Head
Machined
for optimum toughness and resistance to wear.
Also
called “Hex” style.
Popular in machine tools.
|
 Torx
Insert Bits
Positive
torque control with no cam-outs.
Maximum drive surface and
longer drive life.
Hot formed for optimum toughness and
resistance to wear.
Fastest growing style.
Many
configurations and hardnesses.
Milled and chamfered.
|
 Pozidrive
Insert Bits
Cold
formed for optimum toughness and resistance to wear.
Reduces
cam-out.
Popular in automotive and other applications.
|
 Frearson
Insert Bits
Cold
formed for optimum toughness and resistance to wear.
Insert
style only.
Size 1 for #5 and smaller screws.
Size 2 for #6
and larger.
Found in some golf clubs.
|
 Square
Recess/Robertson Insert Bits
Cold
formed for optimum toughness and resistance to
wear.
CRYO-Temp® manufacturing process provides
maximum strength and durability.
Popular in mobile homes,
recreation vehicles, and some furniture.
|
 Torx
w/ Pin
Tip
drilled to fit Torx tamper resistant screws.
|
 Socket
Head w/ Pin
Machined
for optimum toughness and resistance to wear.
Also called “Hex”
style.
Popular in machine tools.
For Allen® screws with
pin.
|
 Torxalign
Insert Bits
Bits
wedge into the screw.
Fits same screws as standard Torx®
bits.
|
 Double
End Insert Bits
Milled
for optimum toughness and resistance to wear.
Maximizes
value.
Many styles and hardness combinations
|
Commonly Asked Question
How hard are your screwdriver bits?
Extra Hard: 59-63 HRc, Medium Hard & Iso-Temp: 52-56 HRc
Why is this important?
Medium Bits are recommended for driving standard (soft) screws and for impact use. Extra Hard Bits are for driving heat-treated or case hardened screws, such as sheet metal or self-tapping and self-drilling screws. Iso-Temp Screwdriver Bits are in the Medium Hard Range and also provide additional flex as needed in some applications such as Torq-Set or Tri-Wing Bits
|
Clearance items from Powers, Tilman, Stanley & more...
